Views: 0 Author: Site Editor Publish Time: 2021-09-17 Origin: Site
As an important chemical, p-Valeroylbiphenylis introduced in the following three aspects.
Here is the content list:
l Basic information
l Handling and storage
l Handling of special circumstances
Product Name: p-Valeroylbiphenyl
CAS Number: 42916-73-4
Molecular Weight: 238.324
Density: 1.0±0.1 g/cm3
Boiling Point: 368.7±11.0 °C at 760 mmHg
Molecular Formula: C17H18O
Flash Point: 158.7±14.2 °C
Molecular formula:C17H18O
For the transportation of p-Valeroylbiphenyl, the following conditions need to be paid attention to.
Operation precautions: Operation and disposal should be carried out in a place with local ventilation or comprehensive ventilation facilities.
See section 8 for personal protective measures.
Use explosion-proof ventilation systems and equipment.
If canning is required, the flow rate should be controlled, and there should be a grounding device to prevent static electricity from accumulating.
Avoid contact with incompatible materials such as oxidants (refer to section 10 for incompatible materials).
Empty containers may be harmful residues.
Pay attention to safety when you come into contact with p-Valeroylbiphenyl. If you touch it, don't be too alarmed, and take effective and reasonable measures to remedy it.
1.First-aid measures
Inhalation: If inhale p-Valeroylbiphenyl, move the patient to fresh air.
Skin contact: Take off contaminated clothing and wash skin thoroughly with soap and water. Seek medical attention if it is necessary.
Eye contact: Separate the eyelids and rinse with running water or normal saline. Seek medical attention immediately.
Ingestion: Rinse mouth, do not induce vomiting. Seek medical attention immediately.
Advice to protect rescuers:
Move the patient to a safe place. Consult a doctor. Show this chemical safety data sheet to the doctor on site.
2.Fire Fighting Measures
Extinguishing agent: Use water mist, dry powder, foam, or carbon dioxide fire extinguishing agent to extinguish the fire. Avoid using direct water to extinguish fires. Direct water may cause flammable liquids to splash and spread the fire. Precautions and protective measures for fire extinguishing: Firefighters must wear self-contained breathing apparatus and full-body firefighting suits to put out fires in the upwind direction. Emergency Response for Leakage. Protective measures, protective equipment, and emergency procedures for workers: It is recommended that emergency personnel wear air-contained breathing apparatus, anti-static clothing, and rubber and oil-resistant gloves. Do not touch or cross the spill. Cut off the source of leakage as much as possible. Eliminate all ignition sources. According to the area affected by liquid flow, steam, or dust diffusion, the warning zone shall be delineated, and unrelated personnel shall be evacuated from the crosswind and upwind to the safe area.
3.Environmental protection measures:
p-Valeroylbiphenyl is harmful to the environment. To protect the environment, p-Valeroylbiphenyl needs to be handled properly. Contain leaks to avoid environmental pollution. Prevent leaks from entering sewers, surface water, and groundwater. The containment and removal methods of the leaked chemicals and the disposal materials used: Small amount of leakage: collect the leaking liquid in a sealable container as much as possible. Absorb with sand, activated carbon, or other inert materials and transfer to a safe place. Do not flush into the sewer. Close the drainage pipe. Cover with foam to prevent evaporation. Use the explosion-proof pump to transfer to a tank truck or special collector, recycle or transport to waste disposal site for disposal.
Mulei (Wuhan) New Material Technology Co. Ltd., has been developing in the field of biochemistry for many years and conducted a large number of tests before leaving the factory to ensure quality. If you are going to purchase p-Valeroylbiphenyl and more Cosmetic products, you can consider using our cost-effective products.
Our company was founded in 2016 since then we have pioneered in the manufacturing and trading of organic intermediates, pharmaceutical intermediates, chemical solvents and agrochemical. For us, product quality and customer service are of the most importance. read more